By Chris Feniello
A flat roof is not really flat — it just has a very low slope. And that low slope is the whole story. With no pitch to shed water, a flat roof has to deal with ponding, snow sitting in place, and debris collecting instead of washing off. That is why the membrane matters so much, and why picking the right one for your building matters more than picking the cheapest one.
We install all four of the main flat-roof systems across Suffolk and Nassau counties — on warehouses, storefronts, office buildings, apartment buildings, and homes with flat or low-slope sections. There is no single best system. There is a best system for your roof, your budget, and what the building is used for. Here is how they compare, straight.
TPO: The Energy-Efficient Newcomer
TPO stands for thermoplastic polyolefin. It is a single-ply white membrane, applied with a heat gun, and its seams are heat-welded together — which gives it a very strong seam seal.
What it is: A single-ply thermoplastic membrane, usually white, installed over insulation board.
Best for: Commercial buildings and homes where summer cooling costs matter, and where puncture resistance counts — TPO has very high resistance to punctures, which means less chance of damage during heavy rain or hail.
Strengths:
- The white membrane reflects the sun, which keeps the building cooler and can cut air-conditioning costs.
- Strong, heat-welded seams and high puncture resistance.
- Can achieve UL Class-A fire resistance listings.
- Works well on Long Island flat roofs and in warmer climates.
Watch out for: TPO is newer than EPDM, so installation quality matters even more — the crew has to know the product and weld the seams correctly. A bad weld is a leak waiting to happen.
Lifespan: A long service life when it is installed correctly and maintained. The exact number depends on membrane thickness, installation, and upkeep.
Learn more about TPO flat roofing
EPDM: The Tried-and-True Rubber Roof
EPDM stands for ethylene propylene diene terpolymer. In plain language, it is a synthetic rubber membrane, and it is the most popular flat-roof system installed in Suffolk and Nassau counties today — for good reason.
What it is: A durable rubber membrane, available in black or white, fastened over insulation board with plates and screws. It can be installed fully adhered, mechanically attached, or ballasted, and its seams are sealed with liquid adhesives or specially formulated tape.
Best for: Just about any flat or low-slope roof, commercial or residential. If you want the system with the longest track record on Long Island, this is it.
Strengths:
- Proven over decades — we have been installing EPDM on flat roofs for over 60 years.
- Very hard to rip. The membrane is layered: a top surface, a polyester-reinforced layer for strength, a fire-retardant layer, and an elastomeric layer that stays flexible in frost, extreme heat, and UV.
- Fully waterproof when installed right, and flexible enough to handle Long Island winters and summers.
- Available in black (absorbs heat) or white (reflects it), so you can match it to the building.
Watch out for: Seams are sealed with adhesives or tape rather than welded, so seam work and maintenance matter. And black EPDM absorbs heat — good in winter, less good if the building runs hot in summer.
Lifespan: 20 to 50 years, depending on the product, the quality of the installation, and preventative maintenance.
Learn more about EPDM flat roofing
PVC: The Tough, Chemical-Resistant Membrane
PVC stands for polyvinyl chloride. It is another single-ply thermoplastic membrane, reinforced with a polyester or fiberglass scrim for strength, and its seams are welded with hot air or solvent welding.
What it is: A thermoplastic membrane, typically 40 to 90 mils thick, reinforced with scrim, with welded seams. Clearview installs Firestone PVC and more.
Best for: Commercial and industrial buildings — especially ones where the roof is exposed to chemicals, grease, or heavy foot traffic — and any flat roof where puncture and chemical resistance matter.
Strengths:
- Highly durable and resistant to punctures, tears, weathering, chemicals, and UV.
- Reflects sunlight and heat, which cuts cooling load and energy costs. It can also be insulated for even better efficiency.
- Low maintenance and easy to install, which keeps labor costs and downtime down.
- Welded seams, like TPO, for a strong, watertight bond.
Watch out for: PVC is a premium membrane, and it is less forgiving of poor installation than some other systems. The crew has to follow the manufacturer’s instructions and local building codes — which is exactly why you want an experienced installer.
Lifespan: Up to 30 years with proper care.
Learn more about PVC flat roofing
SBS: The Affordable, Time-Tested Modified Bitumen
SBS stands for styrene-butadiene-styrene. It is a modified bitumen system — a synthetic rubber material reinforced with fiberglass or polyester matting, applied in layers over the roof.
What it is: A multi-layer modified bitumen roof. A layer of asphalt goes down, then matting, then the SBS material in one or more layers, with the edges and seams sealed for a watertight finish.
Best for: Property owners who want a reliable flat roof at the most affordable price point, without giving up durability.
Strengths:
- The most affordable of the four options — and tried and true.
- Highly durable in extreme weather: heavy rain, hail, and high winds.
- Very flexible, so it handles expansion and contraction as temperatures change.
- Highly resistant to leaks, and can help with energy efficiency by reflecting sunlight.
Watch out for: It is a layered system, so the quality of each layer and each seal matters. It is also heavier than single-ply membranes, which is worth knowing on an older structure.
Lifespan: A long service life when installed in proper layers and maintained. The exact number depends on the number of layers, the material, and upkeep.
Learn more about SBS flat roofing
The Comparison at a Glance
| TPO | EPDM | PVC | SBS | |
|---|---|---|---|---|
| What it is | Single-ply thermoplastic membrane | Synthetic rubber membrane | Single-ply thermoplastic membrane | Modified bitumen, layered |
| Seams | Heat-welded | Adhesive or tape | Hot-air or solvent welded | Sealed layers |
| Best for | Energy efficiency, puncture resistance | All-around reliability, longest track record | Commercial/industrial, chemical resistance | Budget-conscious, proven durability |
| Energy | Excellent — white, reflective | Good — black or white | Excellent — reflective | Good — reflects sunlight |
| Lifespan | Long — varies by product and installation | 20–50 years | Up to 30 years | Long — varies by layers and installation |
| Cost | Varies by material and job | Varies by material and job | Varies by material and job | Most affordable of the four |
Repair or Replace? How to Decide
Not every flat-roof problem needs a new roof. Here is how we think about it:
Repair is usually the right call when:
- The leak is in one spot — a seam, a flashing, a drain, or a puncture.
- The membrane is mostly sound and the roof is well within its expected life.
- The deck underneath is dry and solid.
Replacement is usually the right call when:
- Leaks keep coming back in different places.
- The membrane is blistered, cracked, or brittle across large areas.
- There is ponding water that never drains, or the insulation and deck underneath are wet or rotted.
- The roof is at or past the end of its expected life and repairs are just buying months.
The honest answer depends on what is actually on your roof, and the only way to know is to get up there and look. That is what our commercial roof inspection is for — a hands-on inspection of the membrane, seams, flashing, drains, and deck, so you get a straight recommendation instead of a guess.
What Does a Flat Roof Cost in 2026?
Flat roofing costs more than shingle roofing. As of 2026, asphalt shingle roofing runs anywhere from $5 to $6.50 per square foot or higher, depending on the number of layers on the roof, the product, and the complexity of the job — that range is for shingles, not flat roofs. It covers the three shingles we install: Owens Corning Duration, GAF HDZ, and Tamko Titan. Flat-roof systems run higher and vary by material: TPO, for example, runs $12–18 per square foot as of 2026, depending on mitigation and insulation factors. SBS is generally the most affordable of the four flat systems, and the others move up from there depending on the membrane, the insulation, and whether the old roof comes off or the new system goes over it.
The only way to get a firm number for your building is an in-person look at the roof. We give free estimates, and we will walk you through the options in person.
Flat Roofing by Clearview
We install flat roofs on commercial buildings and homes across Suffolk and Nassau counties, and we have been doing it for over 60 years. That means TPO, EPDM, PVC, and SBS — plus built-up roofing, roof coatings, and roof hatches — installed by crews who do this work every day, not once in a while.
We also inspect, repair, and maintain flat roofs, and we help with insurance claims when storm damage is involved. If your flat roof is leaking, ponding, or just past its prime, call us and we will come look at it.
Call Clearview Roofing & Construction at 631-262-7663 for a free estimate on your flat roof.
Frequently Asked Questions
Which flat roofing system lasts the longest?
It depends on the product, the installation, and maintenance. EPDM can last 20 to 50 years. PVC lasts up to 30 years with proper care. TPO and SBS also have long service lives when installed correctly. The installer matters as much as the material.
Can a new flat roof go over the old one?
Sometimes. It depends on the local building code, the condition of the old roof, and how many layers are already there. We will tell you honestly after we inspect it.
My flat roof ponds water after it rains. Is that a problem?
Standing water that does not drain within 48 hours is a problem — it adds weight, wears the membrane, and finds its way inside. It is one of the things we check first on an inspection.
Do you do flat roofs on homes, or just commercial buildings?
Both. Plenty of Long Island homes have flat or low-slope sections — over garages, additions, and porches — and we install and repair all four systems on residential roofs too.
About the Author
Chris Feniello is the Managing Partner of Clearview Roofing & Construction, a Long Island roofing company serving Suffolk and Nassau counties since 1961. He leads the company’s roofing, insurance-claims, and construction work across its five Long Island offices.